Copyright © Vernon W. Huang 1993 Prescriptions on Tap Rapid Prescription Writer for the Newton MessagePad Copyright © Vernon W. Huang 1993 Disclaimer: THIS SOFTWARE IS PROVIDED ÒAS ISÓ WITHOUT WARRANTY OF ANY KIND. FURTHER, MEDICAL MICROSYSTEMS DOES NOT WARRANTY, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDIG THE USE, OR THE RESULTS OF THE USE, OF THE SOFWARE OR ACCOMPANYING MATERIALS IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. Introduction: Rx on Tap is a timesaving program for the Newton MessagePad and Sharp ExpertPad. Using Rx on Tap, any given prescription, no matter how complicated, is only a few pen taps away. No longer will you have to scribble out those complicated instructions for tapering a medication over the course of weeks. No more phone calls from the pharmacist who is trying to decipher your hieroglyphics. Rx on tap also incorporates a weight based dosage calculator for each entry Required Hardware: 1) Newton MessagePad or Sharp ExpertPad. 2) Memory card highly recommended 3) Newton Connection kit for entering data from your desktop computer. 4) Printer--the software was developed to take advantage of pre-printed prescriptions loaded into a Stylewriter II. Please let me know your experiences with other printers. Installation: 1) Using Newton Connection Kit or Package Express, load the Rx on Tap program and the optional utility program on your PDA. 2) Open the Rx on Tap package by tapping on the icon. You will be at the main page, note that there is only one drug preloaded. 3) Tap the ÒSetupÓ button, enter your personal data. Your DEA number will only be printed when you specify. Tap the close box to exit this page. Rx on Tap is now configured for you. 4) You may run the included Utility program to add a number of preconfigured medications. It doesnÕt matter if you do this before or after running the main program. Also run the utility if you should want to uninstall all the files associated with Rx on Tap. Entering a New Medication 1) From the opening page tap on the ÒNewÓ button. 2) You will be presented with a group of expanding entry fields. 3) Type the drug name in using the onscreen keyboard rather than writing it in as it is unlikely that the name is in the NewtonÕs internal dictionary. 4) Other fields such as ÒdoseÓ, ÒunitsÓ, ÒformulationÓ can be entered by handwriting or typing. These fields also have pop up choices which can be accessed tapping on the label name when a diamond is visible to the left of it. Try to use the popups whenever possible. 5) Notes on this drug can be saved by tapping on the ÒDose/InfoÓ button at the bottom center of the page. Here you can enter notes or a default mg/kg/dose amount for weight based dosage calculation. 6) Ensure that the ÒName ShownÓ line is to your liking. Edit it or tap on the ÒDefault NameÓ button before saving. You may need to close all the entry fields before the complete name is generated. 7) Once you are satisfied with your entry tap on the ÒSaveÓ button. 8) The release software will use meds that you entered using the demo Printing or Faxing a Perscription 1) From the opening page tap the prescription that you are interested in. 2) Check the ÒDo Not SubstituteÓ box on the perscription and fill in the number of refills as desired. 3) Select either ÒPrint RxÓ or ÒFaxÓ from the routing button. NOTE: The word VOID will be printed on the demo prescriptions as well as the fax. The commercial program will be configured for your individual prescriptions. The faxed prescriptions will have your professional data. Deleting a Medication 1) From the opening page tap the prescription that you would like to delete. 2) Select ÒDeleteÓ from the routing button. Duplicating a Perscription 1) From the opening page tap the prescription that you would like to duplicate. 2) Select ÒDeleteÓ from the routing button. Editing a Medication 1) From the opening page tap the prescription that you would like to edit. 2) Select ÒEditÓ from the routing button. 3) Make your desired changes. 4) Check the ÒName ShownÓ after closing all entry fields and tap the ÒSaveÓ button Beaming a Prescription 1) From the opening page tap the drug that you would like to beam. 2) Select ÒBeamÓ from the routing button. 3) If the receiver has Rx on Tap installed the drug will be available to them as soon as they ÒPut AwayÓ the entry in the ÒIn BoxÓ. Moving a Perscription: Rx on Tap respects your preferences in whether to store new perscriptions internally or on an optional memory expansion card. To change the location that a perscription is stored follow these instructions. 1) From the opening page tap the prescription that you would like to move. 2) Select either ÒMove from CardÓ or ÒMove to CardÓ on the routing button. Using with Newton Connection Kit Utilizing Newton Connection Kit, available for both Mac and Windows, one can back up drug information, edit drug information and enter new drugs on your desktop computer. In order to take advantage of this you will have to install Rx on Tap on your PDA and open the program at least once. That being done, you can ÒsynchronizeÓ your Newton and main computer. Once the machines are in synch. you can double tap on the ÒRx on Tap InfoÓ lines in the connection window and view your available drugs. You can cut and paste drugs from the spreadsheet like display that you are presented with after opening ÒRx on Tap InfoÓ in the Connection Kit. Please see the instrutions that came with your connection kit for details. Entering New Drugs via Connection Kit: 1) Try to use the same terminology as the program uses on the PDA. This will help the program to generate a name to show if you do not specify one yourself 2) Enter a Showname that will remind you of what this prescription is. This is the line that will be presented in the table on the front page of the program. A rudimentary showname will be generated for you if you leave the ÒShowNameÓ blank in the connection kit. It will not be as detailed as the showname generated when you enter a drug directly on the Newton. This is a limitation in Newton Connection kit that will hopefully be remedied in a future release. 3) To modify the Name Shown once the drug information is on your newton see the instructions for editing. ORDERING INFORMATION: Version 1.0 will be released in April of 1994. As well as being a fully functional version of the demo program it will include the following features 1) Patient information printed on each prescription until changed. 2) Program customized with margins for your own pre-printed prescriptions. It will, hopefully, have the ability to print prescriptions wirelessly by ÒbeamingÓ to an infrared receiver available from Medical Microsystems. This feature is contingent on low level infrared programming information that is presently not available to Newton developers but is reported to be released soon. Final price has not yet been set. Pre-orders are being taken for $99 until March 31st, 1994. To pre-order, fax a voided prescription to 714-552-3808. This is necessary to set the margins on your personal copy. You will be contacted when the program is ready to ship. Your check can be mailed at shipping time to: Medical Microsystems 130 East Yale Loop Irvine, CA 92714. After July 1994 please contact the author via e-mail to confirm the fax number and address. Vernon W. Huang, M.D. NewtonMail: Vernon Internet: huangv@well.sf.ca.us Compuserve: 74017,2023 AppleLink: Hey.Vern