Name  =  LAPWATCH

 Path =  PDA12:PKGS:CALRCLK:2:LAPWATCH

 Size: 21K         Date: 4/21/98        

 Description:

 LapWatch 1.0.0 - start counting from the Notepad. Small stop watch is

available on Newton. If you beam Notepad from MP2000 to MP130, you cannot

see the whole data because the MP130's screen is too small for that data.

But with HugeNotes,you can scroll Notepad horizontally and see the rest of

the data! Also you can virtually expand the Notepad horizontally. Both

to-right and to-left. Work on Newton OS 2.0 and 2.1 Operation : Start /

Stop / Lap / Clear. 2 ways of Lap function (Interval / Thru). Start

counting with simple button. Tap a button at the bottom of the Notepad,

then LapWatch appears and start counting. If you are using TapBar, you can

use TapBar button to start this LapWatch.



 Name  =  CALENDA1

 Path =  PDA12:PKGS:CALRCLK:2:CALENDA1

 Size: 73K         Date: 4/11/98        

 Description:

 Calendar Folders 1.02 - an enhancement that lets you file calendar

information in folders. Any information that you file using calendar

folders is compatible with any application that uses information from the

Dates soup. System Requirements Calendar Folders requires Newton OS 2.0 or

2.1, and a Message Pad 120, Message Pad 130, Message Pad 2000, Message Pad

2100, or eMate.



 Name  =  WAKEUPCA

 Path =  PDA12:PKGS:CALRCLK:2:WAKEUPCA

 Size:491K         Date: 4/09/98        

 Description:

 Wake Up Call 1.1 - is a great little alarm clock for Newton. It is fully

configurable, allows you to record your own wake up calls to use for the

alarm (in addition to any built-in system sounds), and has a number of

very convenient options. Please see the the web site at

http://www.fivespeed.com/wakeupcall/ for more information, including a

Quick Tour of the programs unique features. Wake Up Call takes advantage

of the advanced audio features in Newton OS 2.1. Therefore, you must have

a Newton device running OS 2.1 or later in order to use Wake Up Call. At

the time of this writing, such devices include the Apple MessagePad 2000,

Apple MessagePad 2100, and the Apple eMate 300.



 Name  =  TPVSTJEN

 Path =  PDA12:PKGS:CALRCLK:ALL:TPVSTJEN

 Size:260K         Date: 4/07/98        

 Description:

 tpv-stj-eng - these files are voices for SayTime, a component of TimePak.

Gravelly, low-quality male voice. Includes Voice (StJ-Eng-5).pkg 134K and

Voice (StJ-Eng-11).pkg 257K. Install using Newton Connection Utilities or

another package installer. When the file(s) appear in your Extras drawer,

tap on the icon to show voice information and check the box labelled Use

this voice in order to add it to the list of preferred voice files.



 Name  =  TPVPLENG

 Path =  PDA12:PKGS:CALRCLK:ALL:TPVPLENG

 Size:253K         Date: 4/07/98        

 Description:

 tpv-pl-eng - these files are voices for SayTime, a component of TimePak.

High-quality female voice. Includes Voice (PL-Eng-5).pkg 113K and Voice

(PL-Eng-11).pkg 215K. Install using Newton Connection Utilities or another

package installer. When the file(s) appear in your Extras drawer, tap on

the icon to show voice information and check the box labelled Use this

voice in order to add it to the list of preferred voice files.



 Name  =  TPVLTTIE

 Path =  PDA12:PKGS:CALRCLK:ALL:TPVLTTIE

 Size:190K         Date: 4/07/98        

 Description:

 tpv-lt-tie - these files are voices for SayTime, a component of TimePak.

High-quality female voice in Vietnamese. Includes Voice (LT-Tie-5).pkg 72K

and Voice (LT-Tie-11).pkg 154K. Install using Newton Connection Utilities

or another package installer. When the file(s) appear in your Extras

drawer, tap on the icon to show voice information and check the box

labelled Use this voice in order to add it to the list of preferred voice

files.



 Name  =  TPVCLPOL

 Path =  PDA12:PKGS:CALRCLK:ALL:TPVCLPOL

 Size:365K         Date: 4/07/98        

 Description:

 tpv-cl-pol - these files are voices for SayTime, a component of TimePak.

Warm, mature female voice in Polish. Includes Voice (CL-Pol-5).pkg 177K

and Voice (CL-Pol-11).pkg 341K. Install using Newton Connection Utilities

or another package installer. When the file(s) appear in your Extras

drawer, tap on the icon to show voice information and check the box

labelled Use this voice in order to add it to the list of preferred voice

files.



 Name  =  TIMEPAK1

 Path =  PDA12:PKGS:CALRCLK:ALL:TIMEPAK1

 Size:291K         Date: 4/07/98        

 Description:

 TimePak - clock-enhancement software for the Newton MessagePad. It's aimed

at visually-impaired users, but people with normal vision will most likely

find it useful as well. TimePak consists of several components, which can

give your Newton a large digital or analog clock on startup, or read the

time in a variety of languages. It can also alert you to upcoming meetings

and unfinished business. A wide variety of options are configurable

through preferences. TimePak works with all Newton OS versions, but is

especially robust on a 2.0 or later unit. It has been tested on the OMP,

MP100, MP110, MP120, MP2000, and MP2100. The software is shareware,

costing $5 for all components.



 Name  =  TIMEPAKB

 Path =  PDA12:PKGS:CALRCLK:ALL:TIMEPAKB

 Size: 11K         Date: 4/07/98        

 Description:

 TimePak Buttons - TimePak is handy, but sometimes its a drag having to open

the Extras drawer just to get the time of day. These are buttons which

install either in a TapBar palette or on the Status bar of applications

such as the Notepad. Theyre freeware, but the packages they control are

shareware: $5 for the whole magilla. Includes TimePak 2.x Button.pkg,

TimePak 1.x Button.pkg, and TimePak TapBar Button.pkg. 		



 Name  =  KEEPTIME

 Path =  PDA12:PKGS:CALRCLK:2:KEEPTIME

 Size: 10K         Date: 3/13/98        

 Description:

 Keep Time 1.0 - This software is for Newton 2.0 Newtons ONLY. Every time

your Newton restarts you lose approximately 50 seconds off of the Newton

clock. Keep Time fixes this problem.



 Name  =  ALARMEDA

 Path =  PDA12:PKGS:CALRCLK:2:ALARMEDA

 Size: 56K         Date: 3/13/98        

 Description:

 Alarmed and Dangerous 1.22 - This software is for Newton 2.0 Newtons ONLY.

Alarmed and Dangerous is a set of enhancements to the Alarm features of the

Newton, desgined to make them more usable and noticable. It lets you

iconify messages, set the duration and frequency of the alarm sounds, and

automatically ignore or iconify certain alarms and notifications. It also

improves the snooze function and adds several new alarm sounds.



 Name  =  ECOUNT1

 Path =  PDA12:PKGS:CALRCLK:2:ECOUNT1

 Size: 14K         Date: 3/12/98        

 Description:

 Ellie's Count Down 1.0 - for a selected date (holiday, your birthday, End

of World or enter one), Ellie's Count Down (ECountDn) displays the

remaining time from now in weeks, days, hours, minutes, seconds. Freeware.

NOS 2.x-only. (Application created with NewtDevEnv, help book with Newt's

Cape).



 Name  =  ALARMCLO

 Path =  PDA12:PKGS:CALRCLK:1:ALARMCLO

 Size: 23K         Date: 3/09/98        

 Description:

 AlarmClock 1.4 - is the ultimate alarm clock for the Newton(tm). This is

for all those who forget to bring their travel clocks on business trips

and during vacation, have bad experiences with absent-minded hotels, or

just do not like the current alarm clock implementation. AlarmClock is

loud, annoying, and configurable, exactly what you are looking for in an

travel clock! Plus, AlarmClock is free for use by the entire Newton

community! Requirements - Any Newton running Newt OS 1.x. Users with OS

2.0 should use to AlarmClock 2.0 immediately.



 Name  =  ALARMCLO

 Path =  PDA12:PKGS:CALRCLK:2:ALARMCLO

 Size: 19K         Date: 3/09/98        

 Description:

 AlarmClock 2.7 - is the ultimate alarm clock for the Newton(tm). This is

for all those who forget to bring their travel clocks on business trips

and during vacation, have bad experiences with absent-minded hotels, or

just do not like the current alarm clock implementation. AlarmClock is

loud, annoying, and configurable, exactly what you are looking for in an

travel clock! Plus, AlarmClock is free for use by the entire Newton

community!



 Name  =  HOLIDAYS

 Path =  PDA12:PKGS:CALRCLK:2:HOLIDAYS

 Size: 13K         Date:11/19/97        

 Description:

 Holidays 1998 - Toad Hollow Software Co. is pleased to announce the release

of Holidays98, a NewtonOS 2.0 freeware utility that adds eighty U.S. civil,

Christian, and Islamic holidays to the Newton datebook. These holidays are

entered in the datebook just as if you added them in the usual way, so

after adding them, this package can safely be removed from your Newton.



 Name  =  TIMEIT2

 Path =  PDA12:PKGS:CALRCLK:2:TIMEIT2

 Size: 32K         Date:10/16/97        

 Description:

 Time It 2.0 - Easy to use timer alarm and stopwatch. Features Quick input

of time, Time up to over 100 hours (>4 days). Timer alarm wakes up Newton.

Can set repeating alarms. Maintain list of times. Digital wristwatch alarm

sound included. Compatible with Sound Icons. Use as a stopwatch. Quick

access to preferences. Includes Help book. NewtonID aware but not

required. Requirements. Time It is available for Newton OS 2.0 and 2.1. It

has been tested on a MessagePad 2000 and MessagePad 130. No testing on a

MessagePad 120 or eMate 300 has been done, but no foreseeable problems

exist at this time.



 Name  =  TIMERWAT

 Path =  PDA12:PKGS:CALRCLK:2:TIMERWAT

 Size:115K         Date: 9/08/97        

 Description:

 Timer Watch 1.0 - is a timer and stop-watch application for the Newton. So

why would you want to use your Newton as a stop-watch? Because Timer Watch

is much more than a regular stop-watch. With Timer Watch you can run the

clock forwards or backwards, select a start time other than zero,

permanently add start times other than zero, record split times, record

time differences between splits, save split times and time differences to

the Notes application, print and fax split times and time differences,

choose how split differences are calculated, choose between 3 different

time displays: hours and minutes, hours minutes and seconds and hours

minutes seconds and hundreths of seconds. Timer Watch. Requires Newton...



 Name  =  PIMPLE2

 Path =  PDA12:PKGS:CALRCLK:2:PIMPLE2

 Size: 30K         Date: 8/25/97        

 Description:

 PIMple 2.7 - Display AND Schedule your Meetings, Events and Todos from a

small desktop calendar. For NOS 2.0 only. PIMple will put a 'PIM button

onto your backdrop application. Tap it and a Month view picker will appear

in the upper left corner of the Newt that automatically pops up the

current day's schedule. Pick any date to display that day's schedule. It

will also show SPACES between meetings not scheduled directly after

another and show meetings with CONFLICTING times using a -- ! ! next to

them. Tapping items on the popup schedule: a) If you tap the Date header,

then Calendar App will open and show the selected Day View. b) If you tap

the Todo header, then Calendar App will open and show the Todo List...



 Name  =  ROOSTA1

 Path =  PDA12:PKGS:CALRCLK:2:ROOSTA1

 Size: 50K         Date: 8/24/97        

 Description:

 Roosta 1.0 - Fun and friendly alarm clock for the Newton OS. Have you ever

mistakenly set an alarm for 7 pm instead of 7 am? Ever need to set an alarm

 for just the weekdays? Roosta can solve these problems and more. Roosta is

a fun and friendly alarm clock with powerful features and options.

Minimizes AM/PM alarm mistakes with visual cues. Set alarm for one time,

weekdays, weekends, or everyday. Use icons to control alarm settings. Can

turn on backlight with alarm. Comes with loud crowing rooster sound. Alarm

sound gradually gets louder. Choose wake up sound. Quick access to

preferences. Use Roosta sounds in other applications. NewtonID aware but

not required. Easy to use. Roosta is available for Newton OS 2.0 and...



 Name  =  FLASHCLO

 Path =  PDA12:PKGS:CALRCLK:2:FLASHCLO

 Size: 18K         Date: 5/21/97        

 Description:

 FlashClock 2.0 - Clock Display for the Newton MessagePad. FlashClock is a

small application that displays the time when you turn on your Newton

device. An extension allows you to modify settings for the clock such as

font, size, and style. The clock display can be placed anywhere on the

screen and can be made to be persistent. FlashClock 2 is only available

for Newton OS 2.0 and 2.1 and has been tested on an MP130 and MP2000. No

testing on MP120 or eMate300 has been done, but no foreseeable problems

exist at this time.



 Name  =  SNOOZEY2

 Path =  PDA12:PKGS:CALRCLK:2:SNOOZEY2

 Size: 19K         Date: 3/11/97        

 Description:

 Snoozey 2.0 - is a Dates enhancement that allows alarms to have snooze

values of 5 minutes, 9 minutes, 15 minutes, 30 minutes, 1 hour, 2 hours, 4

hours, 8 hours, 12 hours, 1 day, 2 days, 3 days, 5 days and 1 week. When

an an alarm/reminder goes off hit the Snooze button and pick a choice.



 Name  =  SIDEREAL

 Path =  PDA12:PKGS:CALRCLK:2:SIDEREAL

 Size:  8K         Date: 2/11/97        

 Description:

 Sidereal 1.0 - is a small time utility for the Newton that automatically

computes and displays the local mean sidereal (astronomical) time based

upon the home location that is set in the Time Zones application, and the

time from the Newton's internal clock. Sidereal should work with all

versions of the Newton OS and requires approximately 6K of storage. Tap on

the Sidereal icon in your Extras drawer to bring up the sidereal clock

display. This display shows the current local mean sidereal time (LMST) in

hours and minutes, and updates automatically. By setting your I am here

location in the Time Zones application and your local time in the Clock

application, Sidereal will compute and display the appropriate...



 Name  =  JEWISHHO

 Path =  PDA12:PKGS:CALRCLK:2:JEWISHHO

 Size:  7K         Date: 1/27/97        

 Description:

 Jewish Holidays 2.0 - This Newton OS 2.0-only application adds the top nine

 Jewish Holidays to your Newton calendar for any year from now until 2001.

Just check the years for which you want to add Jewish Holidays and tap the

Add button. Removing the holidays for any year is just as easy as tapping

the Remove button. The program won't let you add holidays twice or remove

holidays that you already deleted. Version 2.0 adds support for European

date formats allowing use of Jewish Holidays in the U.K. and Germany. The

following holidays are included Rosh Hashanah, Yom Kippur, Sukkot Shemini

Atzeret/Simchat Torah, Hanukkah, Purim, Pesach (Passover), Last two days

of Pesach (Passover), Shavuot.



 Name  =  HOLIDAY1

 Path =  PDA12:PKGS:CALRCLK:2:HOLIDAY1

 Size:  6K         Date: 1/27/97        

 Description:

 Holidays 97 1.0 for Newton! - This NewtonOS 2.0-only application adds the

twenty-seven U.S. Holidays to your Newton calendar for 1997. The program

won't let you add holidays twice or remove holidays that you have already

removed. Although these are U.S. Holidays, this program works with

European Newtons as well.



 Name  =  FLIGHT2

 Path =  PDA12:PKGS:CALRCLK:2:FLIGHT2

 Size: 11K         Date: 1/23/97        

 Description:

 Flight Info - A Newton 2.0 Dates Extension. Trying to schedule my first

couple of business flights in corporate America, I found myself trying to

record flight information as a meeting in Dates. So, I put together this

Dates extension which solved my problem. Yeh, you could add more info and

have it integrate more with other apps, but you'll have to do that

yourself! This extension follows almost exactly the standard 2.0 meeting

interface (rotation, alarm defaults, etc.).



 Name  =  ALARMPAK

 Path =  PDA12:PKGS:CALRCLK:2:ALARMPAK

 Size:250K         Date:12/28/96        

 Description:

 AlarmPak 2.01 - is a great utility that enhances the built-in alarm

function of the Newton. A must have! $15 shareware. Free update for

registered users. For Newton OS, 2.0 only. Ever notice how ineffectual the

Newton's alarm function is? Ever miss an appointment because your Newton

beeped when you were in the hallway, you didn't hear it, and then your

Newton fell asleep? If this is a problem, AlarmPak may be the answer.

AlarmPak captures the Reminder messages from the Dates application and

handles these message much better than the Newton does. AlarmPak lets you

set the volume, beep, and frequency of alarms. AlarmPak also remembers an

unlimited number of reminder messages, so you don't have to.



 Name  =  KW3

 Path =  PDA12:PKGS:CALRCLK:ALL:KW3

 Size:  8K         Date:11/26/96        

 Description:

 KW 3.2 - is a little hack to see the the number of the week in Dates. If

you tap the week number, there will be a floater in which you can choose a

week to be shown in the calendar. KW.PKG is an Auto-Part which means you

can't see an icon of it in the extras drawer but you'll see it in Dates at

the upper left position. If you have a Newton with OS 2.0 or greater, you

will find KW in Extras/Extensions



 Name  =  EURODSTP

 Path =  PDA12:PKGS:CALRCLK:2:EURODSTP

 Size:  6K         Date:10/28/96        

 Description:

 EuroDSTPatch 2.0 - Until last year, european dalight saving time (dst)

stopped on the last sunday in september. This year this was changed, it

now stops on the last sunday in october. This little program patches the

dst stop month accordingly. Launch EuroDSTPatch and press the 'Change'

button. That's all! You can view the change in the Time Zone application.

EuroDSTPatch only runs under NOS 2.0! Version 2.0 - The first version

worked, but caused a problem in the Time Zone application, this has been

fixed in version 2.0. With the new version, you can also remove the patch.



 Name  =  BABYTIME

 Path =  PDA12:PKGS:CALRCLK:2:BABYTIME

 Size:  5K         Date:10/22/96        

 Description:

 BabyTimer 1.02 - is a small freeWare app I wrote for someone whose wife was

having a baby. Since the newton lacked a useful stopwatch, I wrote an

application that will time and record the start/stop times for

contractions, and will calculate the duration and frequency of the

contractions. Requires Newtons with OS2.0. By Nico teWinkel, Ranch

Computing.



 Name  =  TIMEOFM1

 Path =  PDA12:PKGS:CALRCLK:2:TIMEOFM1

 Size:148K         Date:10/16/96        

 Description:

 Time of the Month 1.4 - This version is for Newtons with OS 2.0, and is a

Mac archive. Time of the Month allows the Newton user to produce a paper

calendar, containing days that the user has added drawings or writing to.

TotM is great for use by teachers, Scout leaders or anyone who needs to

distribute a real month-at-a-time event type calendar to others. Time of

the Month is supported both on MessagePads running Newton 2.0, and those

running Newton 1.3. Optional import on start/export on exit. Start week on

any day. Tag printed month with date/time printed or date/time last

updated. Reworked memory usage, to reduce heap consumption.



 Name  =  TIMEOFM1

 Path =  PDA12:PKGS:CALRCLK:1:TIMEOFM1

 Size:152K         Date:10/16/96        

 Description:

 Time of the Month 1.4 - This version is for Newtons with OS 1.3 and is a

Mac archive. Time of the Month allows the Newton user to produce a paper

calendar, containing days that the user has added drawings or writing to.

TotM is great for use by teachers, Scout leaders or anyone who needs to

distribute a real month-at-a-time event type calendar to others. Time of

the Month is supported both on MessagePads running Newton 2.0, and those

running Newton 1.3. Optional import on start/export on exit. Start week on

any day. Tag printed month with date/time printed or date/time last

updated. Reworked memory usage, to reduce heap consumption.



 Name  =  SET241

 Path =  PDA12:PKGS:CALRCLK:ALL:SET241

 Size:  8K         Date: 9/01/96        

 Description:

 Set24 1.4 - Patching a little hole in the Newton OS: Why doesn't 24-hour

mode stay on after a reset? I mean, if you had to re-enter your name and

address onto your MessagePad every time you ran out of memory, we'd all be

using Magic Links. Obviously, some information is reset-proof. Myself, I

tell time in 24-hour style. I want my personal digital assistant to

remember that without tapping six times after a reset. Set24 does just

that. Eventuall, a future OS upgrade will, too, but in the meantime you

can use this little ditty.



 Name  =  FLIGHT

 Path =  PDA12:PKGS:CALRCLK:2:FLIGHT

 Size: 11K         Date: 8/19/96        

 Description:

 Flight - A Newton 2.0 Dates Extension - Trying to schedule my first couple

of business flights in corporate America, I found myself trying to record

flight information as a meeting in Dates (since I haven't purchased any

other travel packages yet, and maybe won't have to). So, I put together

this Dates extension which solved my problem. Yeh, you could add more info

and have it integrate more with other apps, but you'll have to do that

yourself! This extension follows almost exactly the standard 2.0 meeting

interface. The package will install in the Extensions folder on the

default store. This type of extension SHOULD be placed on the internal

store (NOT on a card). After installation, select the package in...



 Name  =  PX

 Path =  PDA12:PKGS:CALRCLK:2:PX

 Size: 12K         Date: 6/27/96        

 Description:

 Px - This Dates extension was designed for those procedure-oriented docs

(not the cognitive type docs) who would like to add a little more

information to their surgical meetings. It follows almost exactly the

standard 2.0 meeting interface (rotation, defaults, etc.). The package

will install in the Extensions folder on the default store. This type of

extension SHOULD be placed on the internal store (NOT on a card). After

installation, select the package in the Extras drawer, press the routing

button, and file the package in the internal store. This package is

shareware $5. For Newton 2.0.



 Name  =  LOCALEFI

 Path =  PDA12:PKGS:CALRCLK:ALL:LOCALEFI

 Size: 14K         Date: 6/05/96        

 Description:

 Locale Fix 1.1 - Locale Fix is a freeware autopart package for Newton which

adds persistent 12H/24H time options, brings speaker dialing to your

locale, and makes Australian Newtons measure distances in km not miles.

Locale Fix 1.1 works on on Newton 1.x and 2.0. When Locale Fix is

installed it makes the following changes. The current Locale Country is

modified to enable tone telephone dialing via the built in speaker. In

other words, if you currently have only the options manual and modem in

the call slip pop up, Locale Fix will give you speaker as well. If the

current Locale Country is Australia, it is modified to specify that

distance is measured in km. For example, Locale Fix will give...



 Name  =  PROXTIME

 Path =  PDA12:PKGS:CALRCLK:ALL:PROXTIME

 Size:  5K         Date: 4/26/96        

 Description:

 ProxTime - ProxTime is a clock that tells the approximate time. When Newton

 has built-in speech synthesis, it will talk (hint, PIE/Apple). ProxTime is

 FreeWare, but not in the public domain.



 Name  =  WHATSUP1

 Path =  PDA12:PKGS:CALRCLK:2:WHATSUP1

 Size: 24K         Date: 4/15/96        

 Description:

 What'sUp 1.02 - What'sUp is a small app that provides a week's overview of

the contents of Newt's calendar and to-do list. Using What'sUp is extrmely

simple since there's not much you can do. When it opens, What'sUp displays

an overview of the upcoming week. Within each day, notes are shown at the

top, then appointments, then to-do items. If there's more than will fit on

the screen, you can scroll using Newt's scroll arrows to see the

remainder. In the top-most day, which is always today, a little triangular

arrow appears of there are any appointments scheduled. It points to where

the time that What'sUp was opened falls in the list of appointments. This

update is for 2.0 users.



 Name  =  CALENDAR

 Path =  PDA12:PKGS:CALRCLK:2:CALENDAR

 Size: 12K         Date: 4/05/96        

 Description:

 Calendar Marker 3.0 - Do you ever wish you could tell when you have

meetings and anniversaries (day notes), just by glancing at the small

calendar displayed in the upper right corner of the Dates display? You

know, just like those $50 pocket organizers that put boxes around

anniversary dates, and little marks at the top or bottom of a day with a

meeting in the morning or afternoon? Calendar Marker does just that! Every

time you open the Dates application, it swiftly checks for any and all day

notes and meetings in the current month. It updates the display when you

change (move, delete) or make a new appointment. It then draws a box

around (or a line under any day with a day note, and places a small...



 Name  =  ALARMPAK

 Path =  PDA12:PKGS:CALRCLK:ALL:ALARMPAK

 Size: 42K         Date: 3/31/96        

 Description:

 AlarmPak 1.4.2 - Ever notice how ineffectual the Newton's alarm function

is? Ever miss an appointment because your Newton beeped when you were in

the hallway, you didn't hear it, and then your Newton fell asleep? If this

is a problem, AlarmPak may be the answer. AlarmPak captures the Reminder

messages from the Dates application and handles these message much better

than the Newton does. AlarmPak lets you set the volume, beep, and

frequency of alarms. AlarmPak also remembers an unlimited number of

reminder messages, so you don't have to.



 Name  =  ECLIPSE

 Path =  PDA12:PKGS:CALRCLK:2:ECLIPSE

 Size:  5K         Date: 2/07/96        

 Description:

 Eclipse - Believe it or not, every time you turn on the Newton 2.0 it

checks whether a solar eclipse is scheduled to happen on that day and, if

it is, it runs a neat graphic of the correct type of eclipse. Frankly, I'm

really impressed with this level of frivolity. Eclipse is also frivolous.

If you are like me and don't know when the next solar eclipse is, and

anyway don't want to wait, Eclipse will let you run the four built-in

Eclipse graphics any time you want..



 Name  =  FEIERTAG

 Path =  PDA12:PKGS:CALRCLK:1:FEIERTAG

 Size: 18K         Date:11/22/95        

 Description:

 Feiertag 1.10d - Dies ist ein Programm fr Leute, die meinen, da in einen

Kalender auch Feiertage gehren: Es trgt Feiertage (fr beliebige Jahre

zwischen 1993 und 2015) als Kalendernotizen (linke, obere Ecke im

Kalender) ein. Danach wird das Programm nicht mehr bentigt und kann wieder

gelscht werden. Feiertage V1.10d is a small NEWTON app that automatically

inserts german public holiday as crib notes in the calendar. You can pick

a year from 1993 to 2015. The following days are supported (you can

check/uncheck each one seperately) - Karfreitag, Ostersonntag,

Ostermontag, Christi Himmelfahrt, Pfingstsonntag,Pfingstmontag,

Fronleichnam, Volkstrauertag, Buss- und Bettag, Totensonntag, and...



 Name  =  DATEREMI

 Path =  PDA12:PKGS:CALRCLK:1:DATEREMI

 Size: 39K         Date:11/22/95        

 Description:

 DateReminder 2.3e - English Version. I wrote DateReminder because I wanted

a way to keep track of birthdays without needing to enter a name card for

each birthday (I only need one address card for a family, but may want to

remember 4 birthdays and an anniversary). I also did not want to enter

repeating meetings to remember the dates from year to year. Dates can be

entered and viewed a month at a time, or for a full year. DateReminder

supports the Newton Connection Kit. This release adds an alarm indicator

in the main view.



 Name  =  DATEREM1

 Path =  PDA12:PKGS:CALRCLK:1:DATEREM1

 Size: 39K         Date:11/22/95        

 Description:

 DateReminder 2.3e - English Version. I wrote DateReminder because I wanted

a way to keep track of birthdays without needing to enter a name card for

each birthday (I only need one address card for a family, but may want to

remember 4 birthdays and an anniversary). I also did not want to enter

repeating meetings to remember the dates from year to year. Dates can be

entered and viewed a month at a time, or for a full year. DateReminder

supports the Newton Connection Kit. This release adds an alarm indicator

in the main view.



 Name  =  CALENDAR

 Path =  PDA12:PKGS:CALRCLK:1:CALENDAR

 Size: 29K         Date:10/10/95        

 Description:

 Calendar Marker 2.0 - Do you ever wish you could tell when you have

meetings and anniversaries (day notes), just by glancing at the small

calendar displayed in the upper right corner of the Dates display?

Calendar Marker does just that! Every time you open the Dates application,

it swiftly checks for any and all day notes and meetings in the current

month. It also does this check when you change or make a new appointment,

or select a new day to view. It then draws a box around any day with a day

note, and places a small line to the left of any day with a meeting. A

line is drawn near the top of a day for a morning meeting, while a line

drawn near the bottom means an afternoon meeting. Shareware, $10....



 Name  =  BYNAME.TXT

 Path =  PDA12:PKGS:CALRCLK:BYNAME.TXT

 Size: 44K         Date:10/03/95        

 Description:

 This is a text file listing of the Calendar & Clock file section of the

Newton CD by name. Use a text reader for full examination of this listing.



 Name  =  BYDATE.TXT

 Path =  PDA12:PKGS:CALRCLK:BYDATE.TXT

 Size: 44K         Date:10/03/95        

 Description:

 This is a text file listing of the Calendar & Clock file section of the

Newton CD by date. Use a text reader for full examination of this listing.



 Name  =  WHATSUP1

 Path =  PDA12:PKGS:CALRCLK:1:WHATSUP1

 Size: 25K         Date: 9/14/95        

 Description:

 What'sUp 1.01 - What'sUp is a small app that provides a week's overview of

the contents of Newt's calendar and to-do list. Using What'sUp is extrmely

simple since there's not much you can do. When it opens, What'sUp displays

an overview of the upcoming week. Within each day, notes are shown at the

top, then appointments, then to-do items. If there's more than will fit on

the screen, you can scroll using Newt's scroll arrows to see the

remainder. In the top-most day, which is always today, a little triangular

arrow appears of there are any appointments scheduled. It points to where

the time that What'sUp was opened falls in the list of appointments.



 Name  =  WUW2

 Path =  PDA12:PKGS:CALRCLK:1:WUW2

 Size:113K         Date: 9/14/95        

 Description:

 WUW 2.73 - Wake Up Week will put up a window with a brief overview of the

next seven days (similar to the overview in the calendar application).

Using the scroll arrows at the bottom of WUW, (left and right) you can

move forward and backward one or more weeks. Clicking on the i button will

bring up a menu, from which you can access the prefs and about box. The

prefs allow you to determine the amount of time needed to trigger the app

(ie if you turn your newt on and off every 5 minutes, you don't want it to

pop up each time, so you could set it to 1 Hour, etc.). It will also allow

you to set WUW so that it only pops up at start up. Includes Birthday Add

and Register.



 Name  =  PERTH119

 Path =  PDA12:PKGS:CALRCLK:1:PERTH119

 Size: 82K         Date: 8/03/95        

 Description:

 Perth 1194 - Install Perth, and then in the upper left corner of your

Newton, you'll see 1194 Time. This is all you'll see once it's running. It

floats above all other applications. Press 1194 or Time for the time!



 Name  =  TIMESQUA

 Path =  PDA12:PKGS:CALRCLK:1:TIMESQUA

 Size: 12K         Date: 8/03/95        

 Description:

 TimeSquare - This is a somewhat eccentric time, date and number entry

device. I've been very pleased with its ease of use, but your reaction

probably depends on your own individual taste. TimeSquare presents a large

rectangle in which 12:01AM is at the top left and 11:59PM is at the bottom

right. The hours grow down and the minutes grow to the right in 5 minute

intervals. Placing the pen down on the square will cause the text box at

the top to show what time the pen is on. Move the pen, without lifting it,

to the time you want to enter, Lift the pen and the last time you were on

will be entered into the text where you were working. You must have a

current insertion point. Also included in this upload is a...



 Name  =  US24HCLO

 Path =  PDA12:PKGS:CALRCLK:1:US24HCLO

 Size:  5K         Date: 5/21/95        

 Description:

 US 24H Clock - This is a simple package at adds two items to the Locale

menu in the Newton's Prefs application. They are U.S.24 and U.S.Mil and

change nothing but the display method for time strings to a 24 hour clock

style. The Military variant does the adds a 0 to the morning times and a  H

where time suffixes are shown. U.S.24 will be set automatically on install

and anytime you re-insert a card -if that is where it is installed. I

suggest you install this package internally to avoid confusion.



 Name  =  REMGUARD

 Path =  PDA12:PKGS:CALRCLK:1:REMGUARD

 Size: 21K         Date: 5/10/95        

 Description:

 Remguard 2.01 - RemGuard is a Newton MessagePad utitlity that helps prevent

missed appointment reminders posted by the MessagePad Dates application.

Normally, it is quite easy to miss Newton reminders. RemGuard makes sure

you don't miss reminders. Features - No need to turn RemGuard on and off.

If it is installed, it is on. No icon required in Extras drawer. Acts as

if it's part of the built-in software (no separate window). Keeps track of

any number of reminders (limited only by memory). Individual reminders may

be acknowledged. Individual reminders may be set to snooze for a specified

time. Number and volume of reminder beeps may be set as preference. Main

window may be hidden and reminders dealt with later. Actual meeting...



 Name  =  DATEVIEW

 Path =  PDA12:PKGS:CALRCLK:1:DATEVIEW

 Size: 15K         Date: 4/19/95        

 Description:

 DateView 0.2 - When you tap on the DateView icon, a window with the current

month appears. You can enter a new date into the input line below the

calendar. Use your local short date format. For US users this is

mm/dd/yyyy or 4/12/1995 for example. Some international users switch the

order of the month and day. Once you've entered a date, tap the little

magnifying glass (search) icon to the right of the entered date. This will

display that month. If you'd like to jump to a date on the month view, tap

it. This will open the built-in Dates application and turn to that date.

You can keep DateView open while Dates is open.



 Name  =  TIMER2

 Path =  PDA12:PKGS:CALRCLK:1:TIMER2

 Size: 11K         Date: 3/27/95        

 Description:

 Timer 2.0 - Timer is a very simply little application that puts a digital

timer on you Newton. Simply install it and open it from the extras drawer.

START/STOP - Starts or stops the timer. Reset - Reset the timer to

00:00:00. The close box does not stop the timer, it just closes the

window. Thetimer will not use any battery power when closes, nor will it

cause the Newton not to fall asleep.



 Name  =  QUICKALA

 Path =  PDA12:PKGS:CALRCLK:1:QUICKALA

 Size: 14K         Date: 2/28/95        

 Description:

 QuickAlarm 0.4 - QuickAlarm installs an Intelligent Assistance verb into

your Newton. With this verb, you can quickly and easily add new alarms to

your Newton Dates application. To use QuickAlarm, simply write alarm on

your NotePad and tap Assist. QuickAlarm will open. The QuickAlarm screen

has two fields for you to select and enter delay and reminder text. You

can write any number of minutes in this field, even several days or weeks

in the future. The Alarm text field allows you to enter the text to be

displayed when the alarm is triggered. QuickAlarm can place it's alarms in

the Schedule or the Day Note view of the Dates application. Expires 30

days after you install it, and will totally expire on 12/31/95.



 Name  =  BIRTHDAY

 Path =  PDA12:PKGS:CALRCLK:1:BIRTHDAY

 Size: 10K         Date: 2/19/95        

 Description:

 Birthdays 1.2 - Birthday updater is a simple App. It looks though all of

the names in the Names soup and adds an entry in the Repeat Names soup for

each birthday. As you add names with birthdays, simply re-run this app and

it will update the birthdays. The added feature of 1.1 is that there is

now a checkbox to allow for the last name to be included in the birthday

annotation. Changes from 1.1 to 1.2 - Added Reminder pop-up.



 Name  =  HOLIDAYS

 Path =  PDA12:PKGS:CALRCLK:1:HOLIDAYS

 Size: 30K         Date: 1/28/95        

 Description:

 Holidays 95 - This utility will insert holiday dates into your calendar

(DATES) application. Date categories include - Government Holidays, US

Standard Holidays, US Misc Holidays, Christian Holidays, and Jewish

Holidays. Provided by Coherent Visual, this application is freeware. Email

them for a catalog of commercial programs.



 Name  =  HOLIDAYE

 Path =  PDA12:PKGS:CALRCLK:1:HOLIDAYE

 Size: 16K         Date:12/28/94        

 Description:

 Holidayer 1.95 - This is a German Holiday installer for your Newton. From

the Docs - Der holidayer installiert Feiertage, Schulferien und die

wichtigsten Messetermin auf Ihr em Newton.



 Name  =  HOURLYCH

 Path =  PDA12:PKGS:CALRCLK:1:HOURLYCH

 Size:  8K         Date:12/12/94        

 Description:

 Hourly Chime - Hourly chime adds a button to the Date and Time preference

roll item. To access it, open up prefs, then go to the Date and Time item.

You'll see a new button called Hourly Chime. Tapping on it will bring

up a view in which you can set the interval and chime sound. This package

will also advance your clock an average of 40 seconds after each restart,

to compensate for the newton's tendancy to slow the clock by the same

amount each time the newton is restarted. (Thanks to Jason Grazado for the

idea, and to Flash Sheridan for discovering the exact amount of time

shift.)



 Name  =  ANYMESSA

 Path =  PDA12:PKGS:CALRCLK:1:ANYMESSA

 Size: 15K         Date:12/02/94        

 Description:

 Any Messages? 2.0 - AnyMessages? 2.0 fixes a long-standing bug with Newton

alarms - Now if you miss one and your Newton goes to sleep, the alarm will

not be hidden. Alarms will now play longer, and at maximum volume, even if

youve turned sound off elsewhere. Version 2.0 can also be operated

manually, like version 1.0; click on its icon in the Extras Drawer to see

the last four messages your Newton displayed. ClockFix should diminish the

Newton clocks gradual loss of time. Usually when your Newton restarts, it

remembers the time in minutes, but forgets the number of seconds, so your

clock will generally be slow. ClockFix tries to set your clock ahead by

its estimate of how much time your clock loses.



 Name  =  MICROTIM

 Path =  PDA12:PKGS:CALRCLK:1:MICROTIM

 Size: 12K         Date:11/25/94        

 Description:

 Micro Timer 1.0 - MicroTimer is a small floating stopwatch for your Newton.

I came up with the idea for doing a stopwatch when I was doing some

benchmarks on different machines at work. I looked at some of the other

available timers and decided they didn't quite meet my needs, so decided

to write my own. MicroTimer was born! How does it work? First of all,

MicroTimer only counts up from 00:00:00 to whenever you stop it. To start

MicroTimer timing, press on the play button. It will then turn into a

pause button, which you can use to pause the timer. This then turns into a

play from pause button to resume timing. The stop button is available at

any time. Pressing it once stops the timer, and pressing it twice...



 Name  =  FEEDTHEM

 Path =  PDA12:PKGS:CALRCLK:1:FEEDTHEM

 Size:  9K         Date:11/25/94        

 Description:

 Feed the Meter 1.0 - Feed the meter is an application for sounding the

Newton's built-in alarm after a predetermined amount of time. Feed the

Meter creates an entry in the Calendar soup with a starting time the

number of minutes in the future that you have specified. It also sets a

five minute alarm for the event. And for those who feed a lot of parking

meters it also deletes Feed the Meter events if you wish.



 Name  =  SALAD2

 Path =  PDA12:PKGS:CALRCLK:1:SALAD2

 Size: 12K         Date:10/30/94        

 Description:

 Salad 2.1 - Salad is a program for Newton that will display the Julian Date

or Week Number in the Calendar / Dates program. A Julian date is in the

form of YYYYDDD. Example - 1994155 is June 4th, 1994. Kind of like a Star

Date. A Week number is just that. Week 1 starts on the first Sunday after

the New Year. Salad is multi-date aware, if you select a range of dates,

Salad shows the start and end date. Just tap or press and hold, on the

Date field and Salad will switch between the three date formats. New -

Changed the way of determining the first Sunday of the New Year. Now is

compatible with all languages and countrys.



 Name  =  ALARMIST

 Path =  PDA12:PKGS:CALRCLK:1:ALARMIST

 Size:132K         Date:10/23/94        

 Description:

 Alarmist 2.0 - Alarmist allows the user to schedule an arbitrary number of

alarms for arbitrary times in the future. The alarms will wake a sleeping

Newt and can play various sounds and display various messages. The alarms

may have one of four degrees of annoyingness and each may have a message

associated with it. When the alarm goes off, a floater is displayed and a

sound may be played. The user can acknowledge the alarm by tapping a

button or defer (snooze) the alarm. If the alarm is ignored (neither

acknowledged nor snoozed) and the annoyingness level is high enough, the

alarm will automatically be rescheduled. A list of alarms (if any) that

have been ignored is displayed at power-on.



 Name  =  TTIME1

 Path =  PDA12:PKGS:CALRCLK:1:TTIME1

 Size:  7K         Date:10/09/94        

 Description:

 TTime 1.3 - Ttime (tiny time) is a small program to give you a small

digital clock. It locates itself in the top left corner of the screen and

can be dragged to where ever. It updates the time every 60 seconds. No

need to restart it if you reset your Newton. It will automatically start.

Ttime floats above most all windows to stay visible. If it's not visible

over another floating window after 60 seconds, close and re-open it (tap

its Extra Drawer Icon twice). The top left placement was determined to be

where most Applications kept blank. However, there are a few that use that

spot, so you can drag it to where you want. There is no close box as it

would destroy the simplicity of Ttime. This program has been tested on...



 Name  =  TIMEAND1

 Path =  PDA12:PKGS:CALRCLK:1:TIMEAND1

 Size: 55K         Date: 9/08/94        

 Description:

 Time & Temp - Time&Temp is a freeware program that will Speak the time and

temp. How to use -Tap the button once for the time. Tap twice for the time

& temperature. Note - If the temp is over 99 F. your PDA is hot ! The

program doesn't know how to say numbers greater than 99. This program is

by Dave Pompea - DMP Systems.



 Name  =  FLOATING

 Path =  PDA12:PKGS:CALRCLK:1:FLOATING

 Size: 13K         Date: 9/08/94        

 Description:

 Floating Time 1.7 - Floating Time is a small simple utility for the Newton

MessagePad. The purpose of this small Newton application is to display the

time and battery level on a permanent basis. It also will stop the

MessagePad from shutting down when it is plugged in, this can be helpful

when you need to view your notes while working at something else. You can

also choose to resize the window and set preferences to let the Newton

shutdown normally or start Floating Time as a small window.



 Name  =  PIT1

 Path =  PDA12:PKGS:CALRCLK:1:PIT1

 Size: 12K         Date: 6/23/94        

 Description:

 Pit 1.3 - I programmed PIT to time scripts and music in the storyboard

phase for Interactive multimedia projects, and for video productions. In

this version I have limited the number of intervals to 24 to reduce memory

needs. I have also added accumulated totals for the interval times. This

is necessary to help in the programming phase of multimedia where you need

to time intervals from a reference point. Pit is designed to time

intervals while the script or sound track is being played back or read.

The intervals collected are used to design each animation or set of images

for accurate storyboards.



 Name  =  OPENTIME

 Path =  PDA12:PKGS:CALRCLK:1:OPENTIME

 Size:  8K         Date: 6/16/94        

 Description:

 OpenTime 3 - This simply little utility, when installed, will cause the

Dates application to automatically open to the current hour. To deinstall

it, simply remove the package from your newton. Note - No icon will appear

in the extras drawer after you install this utility! You will, however,

still see the name OpenTime-ALLAN when you use Remove Software (or

RemoveIt!). This way you can remove the package if you don't like it. This

version no longer contains the Grip of Death and is card friendly! Dates

now open to current time minus 2 hours (to see if you missed anything)!



 Name  =  SETCLOCK

 Path =  PDA12:PKGS:CALRCLK:1:SETCLOCK

 Size: 13K         Date: 6/03/94        

 Description:

 SetClock - This small utility will set Newton's time by calling the

National Institute of Standards in Boulder, Colorado. It installs in the

Preferences roll and does not have an icon in the Extras drawer (although

you still use Remove Software to get rid of it.) The 'Options' button

brings up the Dialing slip which allows you to set your local area code,

as well as any dialing prefix, access code, or credit card information.

Tapping the 'Call' button initiates the call. Newton will hang up

immediately after receiving the time code. Now you can be sure that your

Newton's clock is always correct!



 Name  =  CLOCKWIS

 Path =  PDA12:PKGS:CALRCLK:1:CLOCKWIS

 Size: 38K         Date: 4/27/94        

 Description:

 Clockwise 2.3 Alarm - Clockwise is an alarm clock for the Newton. It is

sleep aware which means that your Newton will wake up automatically and

start Clockwise if the time has come. Use the clock or the entryline under

Alarm to specify the wake up time. To turn the alarm on or off, press the

alarm button. If the alarm goes off and you don't feel like getting up,

press the snooze button for another 9 minutes of sleep. Choose from a

variety of sounds. Never again will you miss an appointment, or sleep in

too late!! Takes up 62k once installed.



 Name  =  HAPPY1

 Path =  PDA12:PKGS:CALRCLK:1:HAPPY1

 Size: 17K         Date: 4/11/94        

 Description:

 Happy 1.23 - Happy is a small Newton application that will remind you of

upcoming birthdays every time you turn on your communication assistant.

Happy is now compble with the MP110. Happy is simple. Tap on Happy and a

reminder will appear. Happy will look through your Names for upcoming

birthdays. Happy will only perform this search once per day, or after a

reset. If someone has a birthday within 14 days of today's date, then

Happy will show that person's name along with the number days until their

birthday. Of course, Happy won't know someone's birthday unless you fill

in the Names card field for birthdate.



 Name  =  CHESSCLO

 Path =  PDA12:PKGS:CALRCLK:1:CHESSCLO

 Size:  8K         Date: 3/17/94        

 Description:

 ChessClock 2.0 - A digital chess clock for the Newton. 2.0 will work with

many differently sized Newton screens. Fixed how the clocks were running

(no longer in idle loop if neither clock is running) the buttons toggle

back and forth. Buttons - [Moves] button - hide or show the move counters.

[Reset] button - set the timers back to the value of Set Clocks.

[Alert]/[No Alert] - will toggle displaying the times up dialog. <>Set

Clock popup - set the time for the clock - you can only set the time in

seconds. The big buttons will toggle back and forth between black and

white. [big black] button - hit to stop your clock and to start your

opponents clock. Read the docs for the rest.



 Name  =  DATEUTIL

 Path =  PDA12:PKGS:CALRCLK:1:DATEUTIL

 Size: 12K         Date: 1/26/94        

 Description:

 DateUtil 0.92 - DateUtil lets you quickly and easily view all of your

Dates, Meetings, To do items, etc. The items are grouped by the Newton's

internal categories, use the Category menu to switch between them. Use the

Store menu to switch between items stored internally and those stored on

the card. The routing slip will let you move or delete individual items

(even those pesky hard to delete repeating items). If you move or delete

an item and have second thoughts, press Undo. New - All item added to the

available settings for the Store menu. Ascending/Descending sorting for

the list. Displays weekday info for repeating events. Fixed bad word

wrapping of items in the list and much much more!



 Name  =  SMALLTIM

 Path =  PDA12:PKGS:CALRCLK:1:SMALLTIM

 Size:  7K         Date:11/15/93        

 Description:

 SmallTime 1.0 - SmallTime is a small app which lets you time events -

basically a tiny stop watch. It is as small as I thought I could make an

app and still have it be useful. I wanted something small to keep basic

time plus I wanted an exercise to learn the Newton programming

environment. Known limitations - It doesnt track hours but if someone asks

I will add it. If people are interested Ill add features such as actual

start time in time of day format and maybe even lap features.



 Name  =  TINYTIME

 Path =  PDA12:PKGS:CALRCLK:1:TINYTIME

 Size:  6K         Date:11/03/93        

 Description:

 Tiny Timer 1.0 - The thing that really surprised me about the built-in

applications in the Newton MessagePad was that there was no timer to time

phone calls, meetings or the usual items that we like to keep track of. As

a result, I threw together this simple timer for all of us Newton Pioneers

to use. It is indeed tiny, taking up just a small amount of the precious

real estate in the built-in RAM. This is kinda cool. Even if your Newton

MessagePad goes to sleep to save on batteries, the timer will keep

running. When you turn the Newt back on, you'll be pleasantly surprised to

see the time still ticking away. The interface is as simple as possible.